JBL Soundbar Universal Remote Codes & Program Guide
With JBL sound bar you can enjoy cinema-quality audio. Without a doubt, these are the best soundbar for apartments. Setting up the device is easy with a remote easy but if a remote stops working things become troublesome.
In this situation, a good universal remote for the JBL soundbar can rescue you. Here you will get the universal codes list and instructions to pair the remote control to the soundbar.
Use the given JBL soundbar universal remote codes list 2024 and easily program the remote to control your soundbar with subwoofers.
Universal Remote Codes For JBL Soundbar [2024]
Without further ado below we are sharing the working list of universal remote codes for the soundbar.
4 Digit Codes
- 4001, 5009, 6050, 3535
5 Digit Codes for JBL
- 30110, 30281, 31306, 32241
Use them to make your universal remote functional with the JBL audio device. Check the guide for pairing a remote to the JBL soundbar with codes.
How To Program Universal Remote to JBL Soundbar Without Codes
- Make sure your soundbar is OFF
- Aim the remote towards the soundbar and hold the ‘Setup’ button for 3-4 seconds, you will see the light of the remote’s ‘Power’ button illuminate.
- Press and release the ‘Aux’ button.
- Now press and release the ‘Power’ button, and the remote light will start blinking, and wait until it stops.
- Repeat step 4 until your JBL soundbar switches ON.
- When the device turns ON, press and release the ‘Volume UP’ button.
- Repeat step 6 after every 3 seconds until your device turns OFF.
- When the audio device gets OFF, press the ‘Aux’ button again to store the code.
Congratulations! You have successfully connected your remote control to the JBL audio device.
The above-given steps are for Philips universal remote and if you have a remote of some other brand you should check this page.
The given remote codes and programming guide are compatible with 2.0 all-in-one, 2.1 deep basses, 5.1 surround, 9.1 wireless with Dolby Atmos, and 5.0 multibeam.
FAQs
How do I use my JBL soundbar without a remote?
You can use JBL mobile app or the buttons on the soundbar to switch ON, set up, and change the volume of your device.
How do I pair my JBL soundbar?
Press the ‘Connect’ button on the subwoofer, the LED light will start blinking. This will put the device in pairing mode. Upon successful completion of the pairing process, the light will stop blinking and you will see a ‘DONE’ message on the soundbar. The light will blink slowly if the pairing fails.
How do I control my JBL soundbar with my Samsung TV remote?
Follow these steps to use your Samsung remote to control the JBL sound bar. Enter settings, select a sound, then choose sound output. Select your soundbar and then close it. You have configured the remote to control your soundbar.
How do I control my JBL soundbar with my Sony TV remote?
Connect the soundbar and TV using an HDMI cable. Enable “Control for HDMI” on both devices. On your TV remote press ‘Sync Menu’, go to HDMI Device selection, choose JBL soundbar and it will start working.
Is there an app for JBL soundbar?
JBL BAR Setup app for iOS and Android devices works with 5.1 Surround. It offers easy connectivity and music streaming. Make sure you have the latest firmware version of the soundbar.
What to do if no button other than power is working?
You can factory reset your JBL soundbar to fix this problem. To reset simultaneously hold all the buttons except the ‘Power’ button on the soundbar for 5 seconds, you will see a ‘Reset’ notification on the soundbar.
Final Words
JBL is one of the popular brands worldwide and is known for its top-quality wireless earbuds, speakers, soundbars, Bluetooth speakers, and gaming headsets. The company offers a lot of variants which makes it easier for you to choose one. JBL offers one of the best soundbars for audiophiles. It is easy to set up and its speakers and subwoofers have amazing sound quality. You will need a remote control to configure the JBL soundbar and control its functions. If the factory remote somehow stops working then getting a JBL universal remote is a good choice. We have shared a list of working key codes that will make the programming of universal remote easier for you. If the codes don’t work, you can follow the automatic code-searching method. Hope you will like the information, you can post your feedback in the comments.