How To Factory Reset RCA Universal Remote Effortlessly

Want to factory reset RCA universal remote? Follow the step-by-step instructions to do it effortlessly in a few seconds.

We had some problems with our RCA remote, we changed the battery first and it didn’t help. Then after some research we reset the remote to default settings and re-program it, surprisingly it starts working. In this post, we will guide you about the exact procedure that we followed, stay tuned. You will need this list of RCA universal remote codes for reprogramming the remote to your device.

How To Factory Reset RCA Universal Remote

Follow these simple steps to reset the universal remote and make it start working normally.

  • Open the back compartment of the RCA remote and remove the batteries.
  • Press and hold the ‘Power’ or any other button of the remote for approx. 60 seconds
  • Now release the button for 30 seconds.
  • Then repeat the steps two to four times. It will clear all the programming memory on your RCA Universal Remote.
  • Insert the batteries again in the battery compartment at the back of your remote.

Your RCA Universal Remote is reset and ready to program with any TV device or other appliances. Remember that once the remote is reset, it needs re-programming. Learn how to program RCA remote to the TV, soundbar, or any other device.

Why reset RCA Remote?

If your RCA Universal Remote is malfunctioning, you can resolve the issue by resetting your remote control. Resetting the remote means erasing all the programming settings on it. When you restore the factory settings on your remote, it is like you purchased a new one from the market, and you can begin programming it to your TV device or any other appliance you want.

The need of resetting a remote control occurs when the TV stops responding to remote commands. There are several reasons for that but one of them is incorrect programming. You can clear the current settings by performing a reset and taking a fresh start.

Why won’t my RCA universal remote work?

RCA universal remote won’t work due to various reasons: faulty batteries, incorrect programming codes, malfunctioning in the operating system of the remote, remote not pointed at the device, parental control, or key lock feature is turned on, power issue in the device you are connecting to, etc.

How to re-program the RCA remote?

To re-program the RCA remote, first you need to perform a reset to remove all the previous programming settings on your universal remote.

Then you can follow the auto programming method or direct code method to re-program the RCA remote to your TV device or other appliances. The auto-programming method is the easiest and quickest way to sync your devices.

For direct code programming, you can find the codes in the user manual you received with your universal remote.

Final Words

For resetting the RCA Universal remote program settings, it is essential to follow the correct procedure. If you don’t follow the right steps you will end up with same issues that you were facing previously. Resetting the remote to original settings erases all the previous programming data from your remote. Make sure if you want to do it. We hope our guide will help you in performing the reset. The steps are easy to follow. After the reset, you need to program the remote for your device or appliance. If you face any other technical issues, contact the customer support team of RCA universal remote for technical guidance.

Martha

Similar Posts

Leave a Reply

Your email address will not be published.