Universal Remote Codes for Jensen TV 2022 + Program Guide

Get the correct and working universal remote codes for Jensen TV and quickly pair the remote easily in less than a minute.

If your TV has stopped responding to the remote control commands even after replacing the batteries, it is time to replace it. Here your best bet is the GE universal remote. Why are we saying the GE is the best universal remote for Jensen TV?

It is mainly because of its ease of use and functionality. The GE remote control has a huge database of over 7000+ universal codes of 1000+ devices of different brands. One of the best things about their remote is, it is programmable up to 8 different devices at a time. With this, you will be able to control your TV, Soundbar, Blu-ray, and other media devices with a single remote.

However, in order to use a universal remote, you need to program it first, and for that, you’ll need Jensen TV universal remote codes. You can set up the remote by using three, four, or five-digit codes that we’ll list on this page.

Universal Remote Codes for Jensen TV

Below is the complete list of universal remote of codes for Jensen television. Apply any code with the help of given guides and your remote will start working.

Five Digit Codes Jensen universal codes

  • 11326
  • 13204
  • 10761
  • 11299
  • 10050
  • 10817
  • 11933
  • 10815
  • 12541
  • 10005
  • 12210
  • 12726
  • 12284

Four Digit Codes for Jensen Remote control

  • 0004
  • 0009
  • 0133

Three-Digit Jensen Remote control Codes

  • 004
  • 009

RCA Universal Remote Codes for Jensen TV

  • 1004
  • 1006
  • 1196

GE Universal Remote Codes for Jensen TV

  • 0004
  • 0009
  • 0133

Philips Universal Remote Codes for Jensen TV

  • 0002
  • 0502
  • 0914

Jumbo Remote Codes for Jensen TV

  • 004
  • 009

One-For-All Universal Remote Codes for Jensen TV

  • 0797

How to Pair Universal Remote to Jensen TV

Choose any one of the guides given below and start configuring your universal remote to control functions of the Jensen television:


A universal remote is compatible with the following Jensen devices: JTV1917DVDC, JTV2815DC, JTV3217DC, JTV19DC, JTV24DC, JTV4015DC, LED Televisions

FAQs Jensen TV Remote

Which is the best universal remote for Jensen TV?

The best universal remote to control Jensen TV functions is the One for all universal remote. In addition to that, the GE remote also performs well.

How do you program a universal remote to a Jensen TV?

  1. Switch ON your TV manually.
  2. Simultaneously hold the “TV” and “Power” button on the remote and wait till the light illuminates.
  3. Release both buttons.
  4. Now, press and release the “Power” button and wait for a few seconds until the remote light stops blinking. Repeat this process until your TV switches OFF.
  5. Once your TV turns OFF, it means you have paired the remote to the TV.

How do you program a Jensen jr300 universal remote?

Hold the remote’s “Setup” key till the light blinks twice, then release. Enter the first 4-digit code for the Jensen TV. The remote light will turn OFF when you enter the correct code.

Will RCA universal remote work on Jensen TV?

Yes, the RCA universal remote works fine with the Jensen TV.

Can I control Jensen TV without remote?

Yes, Jensen TV has a control panel on the side or at the back. You can use it to tune, change channels, and control volume of the television.

Final Words

We hope this article was helpful for you! Go ahead and use the given codes in order to program a universal remote to Jensen TV, DVD player, or other devices. The process is simple, and the steps are easy to follow. We made sure to list all possible codes used to program these remotes in this article. However, if we have missed any or you figured out another code that worked for your Jensen TV universal remote control, then don’t hesitate to share it with us.


Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *