Craig Soundbar Universal Remote Codes & Programming

Craig soundbar users get a remote for controlling the volume the other important functions of the music system. And if the remote stops working a universal remote is next best choice. However, the remote has to go through a pairing process, which is not a difficult.

3, 4, & 5 Digit Craig Soundbar Universal Remote Codes

Below, I have shared Craig soundbar universal remote codes so you can program the remote easily, even if you are not a tech-savvy person.

• 856
• 400
• 218
• 009
• 161
• 037
• 042
• 541
• 217
• 6222
• 1036
• 0642
• 4466
• 0073
• 1484
• 4465
• 1038
• 0906
• 0180
• 11822
• 10073
• 10180
• 06222
• 16222
• 00073
• 10508
• 10161
• 13423

Remotes Compatible With Craig Soundbar

• GE Universal Remote
• Philips Universal Remote
• RCA Universal Remote

Programming The Universal Remote To A Craig Soundbar

• Switch ON your Craig soundbar manually.
• Hold the SETUP button on the remote until its flashlight turns on.
• Press and release the AUX button on the remote.
• Point the remote towards the soundbar and enter the universal remote code from the list.
• If the code is accepted, the remote flashlight will turn off.
• Now, press the power button and test the volume function of the remote.

If the remote isn’t working, try the next code on the list.

Remote Programming Without Codes

• Power on your sound system manually and turn Off all nearby devices.
• Hold the Setup button on the remote and release it when the remote flashlight turns on.
• Now, press AUX button one time.
• Aim the remote towards the soundbar, press and release the Power button after every 2 seconds.
• Repeat this step until your soundbar switches off.
• Now, again turn on your soundbar manually.
• Press the “VOL+” button after every 3 seconds until the device turns off again.

This process will search and apply the programming code automatically.

Remote Pairing With Code Search Method

• Press the Power button on the soundbar to turn on the device. Ensure all other devices are off.
• Hold the Setup button for 5 seconds
• Enter the 3-digit code, which is 991.
• Press and hold the power and CH+ buttons simultaneously until the soundbar turns off.
• Test the remote functions, that’s it.

You can check out our remote programming section to find a programming guide compatible with your remote.

Final Words

I hope with the given Craig soundbar codes list and remote pairing guide, you will not face any issue. The list has 3, 4, and 5 digit programming codes for audio system, you need to try them one by one to make the remote work. The given codes are compatible with GE, Philips, and RCA remote control. Let us know which code worked for you.