Universal Remote Codes For Orion TV And Program Guide

Universal Remote Codes for Orion TV and Programming Guide

To help you guys, I am sharing a list of universal remote codes for Orion TV and step-by-step instructions for setting up a universal remote.

Orion TV Universal Remote Programming Codes

RCA Universal Remote Codes

  • 030, 035, 191, 208, 017, 029, 056, 069, 1030, 1035, 1191, 1024, 1208, 1086, 1090, 1106, 0236, 0463, 1463, 1892, 3540, 10463, 11892, 13540, 13650

GE Universal Remote Codes

  • 035, 121, 135, 0121, 0135, 0035, 5004, 5006, 5039, 5040, 5041, 5046, 5055, 5142, 5177, 5235, 5253, 5441, 0281, 0371, 1771, 1781

VIZIO Universal Remote Codes

  • 0121, 0135, 0035

ONN Universal Remote Codes

  • 5011, 5028, 5060, 5062, 5074

Philips Universal Remote Codes

  • 0713, 0115, 0105

Orion TV Universal Remote 3 Digit Codes List

  • 081, 136, 720, 748

Orion TV Universal Remote 4 Digit Codes List

  • 1056, 1030, 2028, 1054, 2000, 1230, 2136, 2005, 2108, 2218, 1167, 2007, 2033, 2035, 1133, 1020

The method and remote codes shared here are 100% working. There are other methods as well to program a remote, but as per our experience, they are a bit time-consuming, and their success is not guaranteed.

To configure a GE, Philips, Vizio, or any other universal remote with Orion TV, you must have a 3 or 4-digit keycode to program it. And we will provide a list of all the codes you can use to sync the remote with your TV, cable box, DVD, etc.

If your desired programming code is not available in the universal remote control user manual, you will find a list of working codes for Orion TV.

The list includes codes for the RCA, Philips, and GE universal remote codes. I used these codes to program the remote with Orion TV, I hope these will be useful for you as well.

How To Program Universal Remote To Orion TV

No doubt, the Universal remote is the best replacement. But having Orion TV remote codes won’t be enough if you don’t know how to use them. I have shared three different ways to pair the universal remote control to Orion TV.

  • Manual programming with codes
  • Programming without codes
  • Code search programming

Let’s begin the programming instruction with method number one, the easiest one. When you enter the code, the remote automatically identifies the make and model of the device. Follow the instructions to program your Orion TV remote now.

  • Step 1: “Turn ON” your Orion TV or any other device you want to program.
  • Step 2: Point the remote in the direction of the TV
  • Step 3: Hold the “Setup” button until the LED light on the remote turns ON. This puts the remote in learning mode.
  • Step 4: Press the device (TV) button on the universal remote control.
  • Step 5: Now, enter one of the 3 or 4-digit “keycodes” from the list above or the remote’s user manual. If you enter the correct code, the glowing light on the remote will switch off.
  • Step 6: Now press the power button to test the remote, if your TV turns OFF, you have programmed the remote successfully.

Now, you can use all the functions of the controller. If it is not working, you might have done any step wrong. Repeat the same process to make it work.

Pairing Universal Remote To Orion TV Without Codes

Another way of programming the universal remote for Orion TV is forcing the remote to scan and find accurate code. It scans all the keycodes in the database and applies the one that is synced between the TV and the remote. Let’s get straight to the instructions for tuning the remote.

  • Step 1: “Turn ON” the TV and direct the remote towards it to begin the process.
  • Step 2: Hold the “TV” button on the remote and wait for the signal. The small light on the remote will turn on or will blink twice.
  • Step 3: Start pressing “Channel +” and “Channel -” and the light on the remote will start blinking. Keep doing so until the TV “Switches OFF”.

NOTE: Switching off is an indication that code has been detected.

  • Step 4: Press the remote’s “Power” to turn on the device. Now start changing the channel or increase/decrease the volume to confirm that the remote is programmed correctly.
  • Step 5: If the functions of the remote are working fine press the “TV” button on the remote again to verify and save the code. The remote’s blinking light will confirm that the code has been stored.

NOTE: This guide will work only for GE remote control. To program RCA, Jumbo, QFX, Magnavox, or any other universal remote control without code, check This Guide.


Which Orion TV models are compatible with universal remote controls?

LED 3241, DTV2784, TV1329, TV32LB2000, TV42LB2000, TV46LB2000, TV19PL110D, TV19PL140D, TV19PL145DVD, TV22PL140D, TV26066, TV22PL145DVD, TV26RN10D, TV26RN20D, TV32082, TV32RN10D, TV32RN20D, TV32PL173DM, TV37094, TV37RN10D, TV37RN15DM

How do you program a universal remote to an Orion TV?

Universal remote can be programmed for Orion TV in three different ways: programming with code, without code, and auto code search.

Can I connect my phone to my Orion TV?

Yes, you can connect your phone to Orion TV and watch live streaming of channels. For that, you need to download and install the latest version of the Orion TV app.

How can I program the Orion TV universal remote without a code?

Programming a universal remote for Orion TV without code can be done through an auto code search method, but it is a bit of a time-consuming process.

How do I bring up the menu on Orion TV?

Press the “Menu” button on the remote, and the menu on the TV screen will pop up. You can use the “Channel +” and “Channel -” buttons to scroll between the menu. Press “Enter” to select any option.

Does the Universal remote app for Orion TV work?

There are several applications available on the google play store that claims Orion TV universal remote app, but to be honest, none of them are working.

What are the Orion TV codes for the DIRECTV remote?

0121, 0135, and 0035 are the Orion TV codes for the DirectTV remote. These codes will also work on Orion, including LCD, LED, and Plasma. Type any one of them using the remote’s keypad.

Final Words

We hope you will like this Orion TV universal remote programming codes and programming guide. To date, all the above-mentioned are working fine, and if there is any update, we will keep you posted about it. If you discover any other method, find new codes, or have any questions related to the guide mentioned above, feel free to post them in the comments box. Our mission is to help all people using a universal remote control.

Leave a Reply

Your email address will not be published. Required fields are marked *