Vizio Soundbar Universal Remote Codes List [2024]

Vizio soundbar is a commonly used all-in-one speaker that gives you the best sound quality without taking up any space. You can easily control all its features using a remote control. But sometimes there is a situation that occurs in which your remote control is unable to perform.

In that case, you can get a universal remote to operate it. At I have shared Vizio Soundbar Universal Remote Codes List and step-by-step pairing guide so that you don’t face any trouble.

Vizio Soundbar Universal Remote Codes List [2024]

You can try any of the below-given codes with Jumbo universal remote, GE, or any other brand’s controller, and one of these will surely work for you.

5 Digit Universal Remote Codes

  • 1009
  • 31517
  • 32454
  • 31975
  • 11144

4 Digit Universal Remote Codes

  • 1517
  • 0660
  • 0883

3 Digit Universal Remote Codes

  • 502
  • 627
  • 004
  • 113
  • 505
  • 011

GE Universal Remote Codes

  • 1636
  • 1646

Xfinity Remote Code

  • 11758
  • 11756
  • 10864
  • 10885
  • 10178

There are many codes that you can use to program the Vizio soundbar. It all depends upon the brand of remote control you are using. In this article, you will find some most 100% workable Vizio soundbar universal remote codes. The above-listed codes will not work with the Sanyo soundbar and LG soundbars.

How Do You Program a Vizio Soundbar to a Universal Remote?

I tried a bunch of codes from the list on different universal remotes and they worked like a charm. You can try them as well and get your remote programmed to the Vizio soundbar. There are several methods to pair a universal remote control to a Vizio Soundbar but the most popular among all are:

  • Programming remote without codes
  • Programming remote with codes

Let’s see how each of these methods works and what you need to implement them.

Program Universal Remote to Vizio Soundbar without Codes

In this method, the remote automatically scans all the Vizio universal remote codes individually. Each code is scanned one after the other and the search stops when the correct one is found. You can follow the below steps to find the correct code.

Step 1: Turn on the soundbar to program it with the universal remote and make sure the nearby devices are off.

Step 2: Direct the remote towards the Vizio Soundbar.

Step 3: Hold the “Setup” button until the little light on the remote flashes. This button varies depending on the universal remote brand.

Step 4: Now, start pressing the “CH+ and CH-“ buttons on the remote until the soundbar switches OFF.

Step 5: Upon turning OFF the device, press the remote’s power button again for confirmation of the code.

If the soundbar turns on, it means you have successfully set up the universal remote with the device. You can test it by increasing and decreasing the volume. In case it doesn’t work you can try this method once again or follow the next method.

If your remote doesn’t support the mentioned steps then you should check our page that includes instructions to program a universal remote to soundbars without codes.

Program Universal Remote to Vizio Soundbar with Codes

Step 1: “Turn ON” the Vizio soundbar and point the remote towards it.

Step 2: Hold the “Setup” or “AUX” and “OK” buttons and wait till the remote light flashes. The flashlight indicates that the remote is in programming mode.

Step 3: Now, enter the key code from the list given above or from the booklet that you received with the universal remote.

If the code is correct, the remote light will blink which is a signal that you have successfully programmed the remote.

Step 4: “Turn ON” the soundbar and start testing its features.

NOTE: If the remote isn’t working or the light doesn’t flash upon entering the codes, follow the same guide with a different code. Keep repeating the above steps until you find the right code.

The above steps don’t support your remote. Don’t worry. Visit this page – Pair Universal Remote to Soundbar with Codes, choose your remote, and follow the instructions.

Program DirectTV Remote to Vizio Soundbar

Some variants of DirectTV remotes are capable of being programmed with soundbars. Below is the guide to pairing a DirectTV remote with a Vizio soundbar.

Step 1: “Turn ON” your Vizio soundbar and the TV.

Step 2: Bring the remote in front of the soundbar and press the “Menu” button.

Step 3: From this menu first choose “Settings” then select “Program Remote”.

Step 4: A list of options will appear on the screen. Choose the “Sound” option.

Step 5: Performing the above steps just as mentioned, the light on the remote will blink multiple times and then stay ON. At this time you have to enter a code from the list above.

Step 6: If the code you entered, the remote light will turn OFF. If it doesn’t try another code.

Keep trying different codes until the tiny remote light turns OFF. Once it picks the correct code, you will be able to control all the features of the soundbar.

Control the Soundbar with the Stock TV Remote

Depending upon the brand of Stock TV remote, you can also program it to increase or decrease the volume of the soundbar. One important requirement of this method is, that your soundbar and TV must have an HDMI ARC port. It is the simplest method to follow. Let’s see how it works:

Step 1: Find the “HDMI ARC” in the soundbar and TV, and connect the HDMI cable to each.

Step 2: Switch on both devices

Step 3: Test the connection. If there is an issue, fix it.

Step 4: If still the pairing isn’t working, enable the CEC option on your television set.

Verizon Fios Key Fix

Even after following all the steps correctly, some keys may not function properly, especially the volume and mute buttons. In that case, follow the below steps for key fixation:

Hold the “OK” button along with the “*” until the red light starts blinking before it turns on completely.

  • Now press the key which is not functioning properly and hold it until the remote tries alternative codes that might work.
  • Release the key as soon as the device responds and the issue is fixed.
  • Lastly, save the key setting by pressing the “OK” button.

It might happen that some universal remotes may not work with some devices. In that case, you can use the key fix method to program each button of the remote separately which is a time-consuming process.

Vizio Soundbar And U Verse Remote Control Fix

  • In order to program the device key on the U-verse with the Vizio soundbar function, you need to enter the 1009 code.
  • On the remote, you can see the button labeled with “Manual code “ or sometimes “ Auto scan mode”. You can press it to program the device key on the remote with the DVD.
  • To program the TV button with the volume function, tap “OK” after pressing “ATT” and enter the code “955”.
  • Now if you want to turn the device off, hold the “OK” key along with “ATT” and release them when the LED blinks. Now enter the code 977.
  • As a final step press “ATT” again along with the “DVD” and “TV” keys and you are done with the control fixing.

Can you control the Vizio sound bar with the TV remote?

Yes, you can control a Vizio soundbar with a Universal TV remote control. But you need to program it first to establish a connection between the remote and the soundbar.

How do I connect my Vizio soundbar to my remote?

If you have a remote that came with the Vizio soundbar you don’t have to do anything to connect it. Simply install the batteries and it will start working. And if you have purchased a GE, Jumbo, or Cox contour remote then you need to program it to make it work.

Can you connect a soundbar to a universal remote?

YES, if your soundbar’s original remote is not working properly, you can get a universal remote. The best universal remote for the soundbar is the one whose codes and programming guide are easy.

How do I pair my Vizio soundbar to my XR15 remote?

Programming XR15 remote control to the Vizio soundbar is easy. Below are the steps:

  • Switch on the Vizio soundbar and direct the remote toward it.
  • Hold the A and D buttons on the remote to activate the programming mode. A light on the remote will turn green.
  • At this enter the soundbar’s manufacturer code.
  • After entering the code wait for the LED light to flash twice. It is a signal that the remote has been paired successfully.

Now it is time to test the remote. Press the volume up/down and power to confirm the remote is working. You won’t need a Vizio soundbar or profile number for this process.

Final Words

Soundbars are commonly used to provide theater-quality sound systems with low budgets and space. Vizio is a popular all-in-one Bluetooth speaker which can be operated on mobile. It can also be controlled using a universal remote for which there are some codes. We have compiled some of the best codes that you can use and you can also fix key issues using the available guide.

Not all remotes have the same control system and it also doesn’t work directly. Like the Samsung soundbar, you need to connect your Vizio soundbar to a universal remote, you need some important codes and learn how to program it.

Leave a Reply

Your email address will not be published. Required fields are marked *