Why Is My Philips TV Remote Blinking Orange [SOLVED]

How To Fix Philips TV Remote Blinking Orange

To fix the Philips TV remote blinking orange light, power cycle your TV, replace the batteries, remove nearby electronic devices, and re-program the remote to the device.

Philips TV remote flashing orange light is a common problem with Philips remote. The light flashes mostly due to the following reasons:

  • Low batteries
  • Remote malfunctioning
  • Interference of electronic devices
  • TV sensor problem

You can fix this Philips remote flashing light issue by applying some quick DIY solutions. If the problem is with the TV sensor or Power Supply, you need to contact Philips customer support or a TV technician.

How To Fix Philips TV Remote Orange Blinking Light

Here are all the possible solutions you can apply to fix the light flashing issue on the Philips remote. This guide is applicable to Android TV, Google TV, or Roku TV. Let’s get started:

1. Weak or Dead Batteries

Your Philips remote won’t work and blink light when the remote batteries are low. It can be easily fixed by replacing old batteries with new ones. Here’s how to do it properly.

  • Open the battery compartment and remove the old batteries.
  • Clean the battery compartment properly. Remove corrosion or dirt because it can block the battery connection
  • Now, install a fresh pair of batteries. Make sure to insert them correctly by taking care of the + and – signs.
  • Close the back compartment.
  • Direct the remote towards your TV and test its functions.

2. Check For Signal Interference or Physical Obstruction

Having a microwave, wireless router, cordless phone, etc., can disrupt the remote signals. Since Philips remote uses IR to transmit signals to TV. Its short range makes it susceptible to obstruction and interference.

Turn OFF or move electronic devices away from the TV and remote. Move a bit closer to the TV and use the remote. I hope this will resolve the problem.

3. Power Cycle Your Philips TV

Remote connection error also occurs when there is some minor glitch in the Philips TV. Power cycling is one of the quickest fixes you can try to get rid of such issues.

Power cycling restarts all functions of the TV and makes it act normally. Here’s how you can Power Cycle Philips TV.

  • Switch OFF your Philips TV
  • Unplug the power cable at the back of the TV and also remove it from the power outlet.
  • Disconnect all devices that are attached to the TV, i.e., streaming device, soundbar, Blu-ray, etc.
  • Leave the TV in this state for 15 minutes.
  • Plug the power cable back into the TV and socket.
  • Turn ON your TV and check remote orange light has stopped.

4. Re-Pair Your Philips Remote

If you are using a remote that requires programming, there is a chance that your remote is unpaired. You can re-pair the Philips remote to the TV and solve the issue. Learn how to program the Philips remote.

5. Clean Philips Remote Buttons

Dirt stuck in remote buttons or liquid spillage on the remote can cause the remote to malfunction. Cleaning the remote using a cleaning solution or Isopropyl alcohol will fix the remote. If you are an expert, disassemble the remote and clean it properly.

6. Check the Remote IR Transmitter

If the Philips remote light is still flashing, test the remote’s IR transmitter. You can do it yourself using your mobile phone. Here’s how to do it:

  • Launch the Camera app on your smartphone, Android or iOS.
  • Direct the remote towards the camera and press the remote buttons.
  • If you see a remote light flashing on your mobile screen, the remote IR is working fine. If nothing flashes, your TV remote control is defective.

The only solution in this case is to replace your remote and get a Philips universal remote.

7. Update Philips TV Firmware

For proper functioning of the Philips remote it is important that your remote and TV’s firmware must match. If there is any conflict between the two devices, the remote will not work.

This problem is very rare, but it does exist. You can check for Philips TV firmware update and install it if there is a new version available. Other reasons include:

  • The remote light will keep blinking due to an update in progress.
  • It also keeps blinking when recognizing a device to connect with.

8. TV Sensor Issue

TV sensor plays a vital role in accepting commands from the remote. If there is any problem with the sensor, the sensor will not perform any action on your remote’s command and blink orange light.

If none of the above troubleshooting methods work, then there is a high chance that your Philips TV sensor is faulty.

One DIY fix for this problem is to reset Philips TV and test the remote again. If things remain the same, you need to contact customer support.

9. Use Philips Remote App As Instant Fix

If everything fails in fixing your Philips TV remote, you can use the Philips remote app as an instant fix. It is not a permanent solution but can be used in the meantime.

Here is a link to download the Philips Remote Application. Once downloaded, pair your mobile to the TV using this app and control its functions.

Final Words

Philips remote light blinking is a known issue, and you can fix it yourself if there is no hardware defect. I have listed all the possible remote troubleshooting methods that you can try one by one to get rid of the issue. Let us know which method worked for you in the comments if you have any query feel free to write us.

Leave a Reply

Your email address will not be published. Required fields are marked *